Jadak XE-50 medical chart recorder alternative
Replace your Jadak XE-50 without redesigning your system with APS GRP212-M0
APS printers integrate into your existing architecture with minimal changes, ensuring continuity, reliability, and long-term availability.
Compatible form factor
Minimal integration effort
Long-term support
Replacing the XE-50 isn’t as simple as it should be
Replacing an existing chart recorder can quickly become complex, especially in validated or critical systems.
Mechanical compatibility :
Redesigning form factor and mounting can delay your project
Regulatory impact :
Changes may require full system revalidation
Supply continuity :
imited availability creates long-term risk
System impact :
Replacing one component can affect the entire architecture
GPR212-M0 : designed for seamless replacement of the XE-50
GPR212-M0 chart recorders are designed to replace the XE-50 in existing systems with minimal integration effort — preserving your architecture, firmware logic, and validation process.
- Drop-in compatible form factor
- Minimal mechanical and electrical changes
- Firmware adaptation kept to a minimum
- Compatible with existing interfaces (TTL / UART / USB)
- Designed for validated medical environments
How the GPR212-M0 compares to the XE-50
| JADAK XE-50 | RECOMMENDED GPR212-M0 | |
|---|---|---|
| Print resolution | 600 dots/25 mm & 200 dpi | ✓ 600 dots/25 mm & 200 dpi |
| Max chart speed | Up to 50 mm/s | ✓ Up to 50 mm/s |
| Trace support | Up to 4 traces | ✓ Up to 4 traces |
| Communication | TTL serial | ✓ TTL UART, USB |
| Dimensions (WxHxD) | Panel: 84 × 72 mm Body: 67 × 80 × 70 mm | Panel: 84 × 72 mm Body: 67 × 80 × 70 mm |
| Paper roll support | Up to 50 mm Diameter | Up to 50 mm Diameter |
| Driver board | External or Built-In | External or Built-In |
| Input Voltage | 12V | ✓ 12V |
| Emulation | Jadak protocol | Jadak & APS protocols |
| Certification | Not specified | ✓ ISO 13485:2016 |
APS : Supporting OEMs in system continuity worldwide
APS supports OEMs and service teams in replacing critical components
while preserving system architecture and validation.
20+
Years of experience
70+
Countries Served
500+
OEM Partners
ISO
13485:2016
Certified
Used in validated medical systems worldwide
How We Support Your Replacement Project
From analysis to integration, our team guides you at every step.
STEP 1
Share your system
Tell us about your XE-50 setup and constraints
STEP 2
Compatibility check
We assess mechanical, electrical, and firmware fit
STEP 3
Get your solution
We recommend the right APS configuration
STEP 4
Integration support
We assist you through validation and deployment
No redesign. No disruption. Just a compatible replacement.
Get your XE-50 replacement quote fast
Tell us about your current system – our engineering team will recommend a compatible replacement with minimal integration effort.
Compatibility check based on your current system
Minimal redesign required
Support for mechanical, electrical, and firmware integration
Solution adapted to validated environments
Fast and simple evaluation process
Tell us about your project